Restrictor Plate - JLF Mod Kit

The JLF Mod Kit lets modify the 3 distinct aspects of your JLF. The gate, the throw and the tension. It does this through the following interlinked components:

Springs (Tension) - The stock spring is rated at 1 lb (First number is Load Point 1 followed by Load Point 2

• Purple Spring (1lb, 1.5lb)

• Blue Spring (1.5lb, 1.5lb)

• Yellow Spring (1.3lb, 2lb)

• Red Spring (2lb, 2lb)

Actuators (Throw) - The stock actuator is 15.8 mm

• White (16.2mm)

• Blue (16.45mm)

• Red (16.7mm)

Restrictor Gates (Shape) - The stock gate is Square

• Violet (Round)

• Yellow (Octagonal)

• Red (Square Type I)

• Blue (Square Type II)

C-Clips

• 5 units